Amada EMZ 3610 NT stamping press
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Wiefelstede
Germany, Wiefelstede
Germany, Emskirchen-Pirkach
Germany, Wiefelstede
Germany, Wiefelstede
Germany, Wiefelstede
Germany, Wiefelstede
Germany, Wiefelstede
Location: NO
Control Brand: FANUC
Punching Force: 300 Kn
Table Load: 160 kg
Working area with repositioning: 5000 x 1525 mm
Max. sheet thickness: 4,5 mm (mild steel)
Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous)
Positioning tolerance: +/- 0,1 mm
Z-turret stations: 45
AutoIndex stations: 4 (2 x B, 2 x C)
Turret feed rate: 30 1/min
Max. number of hits: 1000/min
Machine frame: Bridge frame
Punching drive: Servo-electric Twin Drive
Drives (turret + table): AC-Servo motors
Clamps: Pneumatical
Electrical connection: 400V / 50Hz
Electrical consumption: 1 kW – 7 kW
Air consumption (machine): 250 l/min
Air consumption (Air Jet Vakuum): 250 l/min
Loading unit: Loader L III 300
Sheet size min: 1000 x 300 mm
Sheet size max: 3000 x 1500 mm
Material thickness: 0,5 – 8,0 mm
Max. loading weight: 300 kg
Max. stack height: 300 mm
Max. pallet weight: 4000 kg (2x2000 kg)
Max. feed rate (traverse): 70 m/min
Number of suction cups: 34 pieces
Double sheet control: Yes, with sheet thickness detector
Air consumption: 510 l/min, 6 bar inlet pressure
Unloading unit with Parts Remover: PR 3 UL 300 P
Part size min./max: 150 x 150 mm / 2500 x 1000 mm
Sheet thickness: 0,5 – 3,0 mm (4 mm for EM-Serie)
Max. part weight: 50 kg
Storage table size: 3400 x 1400 mm
Max. part size for unloading clamps: 3000 x 1500 mm
Max. stack height skeleton table: 450 mm
Max. weight skeleton table: 2000 kg
Max. stack height storage table: 450 mm
Max. weight storage table: 4000 kg
Max. feed rate X-/Y-direction: 180 / 90 m/min
Additional equipment
Electrical connection: 400V
Air consumption: 1000 l/min
6 bar inlet pressure
Electrical connection: 400V