ERFURT RDOH 2-400 metal press
Niederhelfenschwil8100 km from you
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+41 71 948 ...
Show
+41 71 948 70 67
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
zig-zag feed
2-axis transfer unit
Press force monitoring BRANKAMP
cushion mounting bar in table with exchangeable pneumatic cushion units
MAYFRAN scrap conveyor (cross conveyor)
optional (separate offer):
MAYFRAN longitudinal conveyor and scrap loading station with swiveling outlet.
Condition:
Machine serviced annually, good overall condition.
next safety check 11/2024
Press Design
drive system: eccentric / crank
frame design: H-frame, monoblock
openings in uprights: yes
number of suspensions: 2
number of slide actions: 1
table cushion: yes
quick die change system: yes
feedstock transport direction: left to right
Press forces
total force (nominal): 400 to
nominal work capacity: 32 kNm
Press Table
table surface (left-right): 2600 mm
table surface (front-back): 990 mm
thickness of bolster plate: 200 mm
height above floor level: 800 mm
opening in bed (left-right): 2250 mm
opening in bed (front-back): 280 mm
Slide
slide force: 400 to
table surface (left-right): 2600 mm
table surface (front-back): 990 mm
stroke: 210 mm
stroke rate (max.): 90 /min
slide (mechan. Press)
slide adjustment: 150 mm
stroke rate (min.): 25 /min
stroke rate (max.): 90 /min
hydraulic overload protection: yes
main drive power: 72 kW
slide ejector / cushion
number of ejectors: 13
nominal force: 3.7 to
stroke: 89 mm
Tool Assembly Dimensions
shut height (stroke down, adjustment up), BDC: 705 mm
distance between columns (H-frame): 2900 mm
passline opening (free passage in side columns): 900 mm
free passage between side columns (height): 545 mm
Coil Chair
coil weight max.: 3 to
stroke: 550 mm
Decoiler
design: single reel, traversable
sheet width max.: 400 mm
sheet width (min): 30 mm
coil weight max.: 3 to
max. diameter of coil: 1500 mm
mandrel expansion range from: 460 mm
mandrel expansion range up to: 530 mm
Leveller Unit
sheet width max.: 400 mm
sheet thickness max.: 5 mm
sheet thickness min.: 0.5 mm
number of leveller rolls: 9
diameter of leveller rolls: 50 mm
number of infeed-/outfeed rolls: 2
diameter of feed rolls: 150 mm
loop controls: yes
Strip-Feeder
feeder type: roll feeder
roll diameter: 120 mm
pilot release system: yes
Transfer System
distance between tools, stroke X max.: 300 mm
distance between tools, stroke X min.: 90 mm
Inner width clamping rails closed max.: 340 mm
Electrical specifications
mains voltage: 400 V
mains frequency: 50 Hz
Dimensions / weights
height above floor level: 6300 mm
total weight approx.: 73000 kg