Geminis GT9 G2 2000×8000 metal lathe
Barcelona6863 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+34 678 66 ...
Show
+34 678 66 35 84
Spain, Barcelona
Spain, Barcelona
Spain, Donostia
Spain, España
50 Hz
Spain, Barcelona
Spain, España
Spain, España
Spain, España
Spain, España
Spain, España
Spain, Barcelona
Spain, España
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Reference: 218-N325
Distance between centers: 8000 mm
Height centers: 1050 mm
Max swing over bed: 2100 mm
Max swing over slide: 1600 mm
Main spindle hole diam: 150 mm
Speed range:
4
Speed range I: 0-80 rpm
Speed range II: 0-175 rpm
Speed range III: 0-350 rpm
Speed range IV: 0-700 rpm
Cross slide travel: 1060 mm
Quill diameter: 400 mm
Quill travel: 300 mm
Allowed weight between points 30.000 kgs.
Main motor power 100 KW
Year: 2015
Equipped with:
Control: FAGOR 8065 (15'' screen)
4 independent jaw chuck: Ø 1600 mm
Hard inner and outer claw set
Square Auto Turret: SAUTER 4 pos - Ø 320x320 mm
Tailstock and quill: Motorized
Rod accommodation: Built-in swivel
Locking/Unlocking the tailstock body: Automatic
Air conditioner for electronic cabinet Yes
Portable electronic steering wheel: Yes
Chip conveyor: Yes
Fixed closed rear window 4 supports Ø 500-900 mm
Max allowed rear window weight: 10.000 kg.
Prepared for C Axis with transmission from the main engine
Prepared for adaptation of milling head with Y axis on turret
Preparation for mounting the grinding head
Very equipped with tools (according to photos)
Presentamos este torno CNC GEMINIS GT9 G2 2000×8000 de segunda mano, fabricado en el año 2015 y equipado con el avanzado control FAGOR 8065 con pantalla de 15”. Con una impresionante distancia entre puntos de 8000 mm y una altura de centros de 1050 mm, este equipo ofrece capacidades excepcionales para trabajos de mecanizado industrial. Se encuentra en excelente estado y disponible para entrega inmediata.
Características técnicas del torno CNC GEMINIS GT9 G2 2000×8000
Referencia: 218-D047
Distancia entre puntos: 8000 mm
Altura de centros: 1050 mm
Ø sobre bancada: 2100 mm
Ø sobre carro: 1600 mm
Ø agujero eje principal: 150 mm
Gama velocidades:
4
Gama I de velocidad: 0-80 rpm
Gama II de velocidad: 0-175 rpm
Gama III de velocidad: 0-350 rpm
Gama IV de velocidad: 0-700 rpm
Recorrido del carro transveral: 1060 mm
Ø caña: 400 mm
Curso de la caña: 300 mm
Peso admisible entre puntos 30.000 kgs.
Potencia del motor principal 100 KW
Año: 2015
Equipado con:
Control: FAGOR 8065 (pantalla de 15'')
Plato 4 garras independientes: Ø 1600 mm
Juego de garras interiores y exteriores duras
Torreta automática cuadrada: SAUTER 4 pos - Ø 320x320 mm
Contrapunto y caña: Motorizado
Alojamiento de la caña: Giratorio Incorporado
Blocaje/Desblocaje del cuerpo del contrapunto: Automático
Climatizador para armario electrónico Sí
Volante electrónico portátil: Sí
Extractor de virutas: Sí
Luneta fija cerrada 4 apoyos Ø 500-900 mm
Peso admitido de luneta: 10.000 kg.
Preparado para Eje C con trasmisión desde el motor principal
Preparado para adaptación de cabezal fresador con eje Y sobre torreta
Preparación para montaje del cabezal de rectificado
Muy equipado con herramientas (según fotos)