DMG WASINO G 100 | 300 metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Machine Benefits
Qualitative Machine Benefits
High spindle speed (above 6000 min⁻¹)
Technical Machine Benefits
High rapid traverse rates
Extra Information
MACHINE STILL UNDER POWER
Units available: 4
Max. Turning Diameter: 285 mm (11.22 in)
Standard Turning Diameter: 60 mm (2.36 in)
Bar Work Capacity: 38.1 mm (1.5 in)
Spindle Nose Type: 100 mm (3.93 in) flat
Through Spindle Hole Diameter: 45 mm (1.77 in)
Spindle Bearing Inner Diameter: 75 mm (2.95 in)
Shank Height for Square Tool: 16 mm (0.63 in)
Shank Diameter for Boring Bar: 20 mm (0.79 in)
Rapid Traverse Rate:X-axis: 12000 mm/min (472.44 ipm)
Z-axis: 20000 mm/min (787.40 ipm)
Jog Feedrate: 0 - 5000 mm/min (196.85 ipm)
Motors:Spindle Drive Motor (40%/Continuous): 5.5/3.7 kW (7.33/4.93 HP)
Feed Motors: X-axis: 0.75 kW (1 HP), Z-axis: 1.2 kW (1.6 HP)
Hydraulic Pump Motor: 0.75 kW (1 HP)
Lubricating Pump Motor: 0.04 kW (0.053 HP)
Coolant Pump Motor: 0.18 kW (0.24 HP)
Cooling Oil Pump Motor: 0.06 kW (0.08 HP)
Compressed Air Supply: 0.5 MPa (72.5 psi), 80 L/min
Tank Capacities:Hydraulic Oil Tank Capacity: 10 L (2.65 gal)
Lubricating Oil Tank Capacity: 2 L (0.52 gal)
Coolant Tank Capacity: 147 L (38.88 gal)
Oil Heat Exchanger Tank Capacity: 10 L (2.65 gal)
Machine Mass with loader specification: 2165 kg
application type: Turning
Location: Hungary
machine type: Horizontal Turning Machine
Machine Depth: 1958 mm
Spindle Power: 5.5 kW