Caterpillar D6N LGP bulldozer
Southampton
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+44 1769 5...
Show
+44 1769 581222
+44 7855 3...
Show
+44 7855 366242
+44 1769 5...
Show
+44 1769 580996
United Kingdom 
ENGINE - Knocking: No engine knocking
ENGINE - Air cleaners: Good as new
ENGINE - Any smoke: No smoke
ENGINE - Oil or fuel leaks: None visible
ENGINE - General running condition: Runs well
TRANSMISSION - Gear change: Good change, no sharpness
TRANSMISSION - Steering: Responsive
TRANSMISSION - Oil leaks: None visible
TRANSMISSION - Is the transmission noisy?: No
TRANSMISSION - Torque converter: Damper feels good
TRANSMISSION - Controls: Good controls
TRANSMISSION - General running condition: Moves well
UNDERCARRIAGE - Shoe height: 58mm, 90%
UNDERCARRIAGE - Shoes any wear in trailing edge: 90%, Wear minimal
UNDERCARRIAGE - Rail height: 118mm, 70%
UNDERCARRIAGE - Any signs of link failure: No
UNDERCARRIAGE - Average diameter of pins and bushings: 59mm, 70%
UNDERCARRIAGE - Have pins been turned on chains: Yes
UNDERCARRIAGE - Sprockets: 22mm tips, 72mm Gape, 80%
UNDERCARRIAGE - IDLERS - Left side idler: Good as new, 99%
UNDERCARRIAGE - IDLERS - Right side idler: Good as new, 99%
UNDERCARRIAGE - TOP ROLLERS - Left side top roller: 180mm x 180mm, 99%
UNDERCARRIAGE - TOP ROLLERS - Right side top roller: 180mm x 180mm, 99%
UNDERCARRIAGE - BOTTOM ROLLERS - Roller 1: 197mm x 197mm 99%
UNDERCARRIAGE - BOTTOM ROLLERS - Roller 2: 197mm x 197mm 99%
UNDERCARRIAGE - BOTTOM ROLLERS - Roller 3: 197mm x 197mm 99%
UNDERCARRIAGE - BOTTOM ROLLERS - Roller 4: 197mm x 197mm 99%
UNDERCARRIAGE - BOTTOM ROLLERS - Roller 6: 197mm x 197mm 99%
UNDERCARRIAGE - BOTTOM ROLLERS - Roller 7: 197mm x 197mm 99%
UNDERCARRIAGE - BOTTOM ROLLERS - Roller 8: 197mm x 197mm 99%
CAB - Cab Mounts - any wear?: No wear
CAB - Any wiring for laser system?: Yes
CAB - Back up alarm: Loud and clear
CAB - Battery isolator switch: Manual and electric
CAB - Lights: All working
CAB - Wipers: All working
CAB - Heater: Good heat
CAB - A/C: Cold
CAB - Seat condition: Good condition, works as should
CAB - Cladding condition: Average condition
CAB - Floor matt condition: No wear or tears
CAB - Seat belt: Undamaged, working
CAB - Mirrors: Rear view only, undamaged
CAB - Horn: Loud and clear
CAB - Cab glass condition: No cracks or chips
CAB - Any perspex fitted: None
CAB - Steps and grab handles secure: All secure and fitted
BLADE - Blade type: PAT
BLADE - Blade width: 4080mm
BLADE - Blade height: 1280mm
BLADE - Main lift rams wear: L/H: 1mm x 2mm, R/H: 2mm x 2-3mm
BLADE - Pitch ram wear: L/H: 3mm x 5mm, R/H: 3mm x 4mm
BLADE - Tilt ram wear: L/H: 1mm R/H:1mm
BLADE - Link bar wear: L/H: 2mm R/H:2mm
BLADE - C Frame wear: L/H: 2mm, R/H: 3mm
BLADE - Ball joint wear: 12mm
BLADE - Equaliser bar wear: L/H: 3mm, Mid: 1mm, R/H: 4-5mm
BLADE - Face / Moldboard: Good thickness, no dents
BLADE - Spill rack condition: Straight
BLADE - Cutting edges condition: Good as new, 100%
BLADE - Have cutting edges been turned?: No
BLADE - General blade condition: Very decent blade
RIPPER - Ripper valve fitted?: Yes
PAINT & DECALS - Any damage to panels: No damage to panels
PAINT & DECALS - Paint condition: Good
PAINT & DECALS - Condition of decals: To be replaced
VPAT Blade
Drawbar fitted
Ripper valve
Rippers available at an additional cost