TURBODEN (Made in Italy) TURBODEN 10 CHP SPLIT other industrial equipment
≈ $525,500
Barcelona6865 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+34 932 69 ...
Show
+34 932 69 62 82
+34 617 18 ...
Show
+34 617 18 90 68
Spain 
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
200,000 kg
Spain, Madrid
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Spain, Lliça de Vall (Barcelona)<br>
Spain, Barcelona
Spain, Barcelona
Spain, Barcelona
Turbina para producir electricidad con aceite térmico siliconado
plantas ORC con caldera de biomasa
FABRICANTE: TURBODEN (Made in Italy)
MODELO ORC: TURBODEN 10 CHP SPLIT
AÑO: 2012
Temperatura del aceite de entrada a carga nominal: 310-250 °C
Temperatura del aceite de
salida a carga nominal: 250-130 °C
Aceite diamétrico ORC: Caída de presión de entrada del
circuito ORC a carga nominal: 1,4-0,1 bar
Aceite diamétrico ORC: Volumen neto del circuito
ORC: 1550-180 cm³
Temperatura del agua de refrigeración de entrada a carga nominal: 60 °C
Temperatura del agua de refrigeración de salida a carga nominal: 80 °C
Caída de presión del
circuito de agua en el modelo ORC a carga nominal: 0,30 bar
Volumen de agua en el módulo
ORC: 950 l
Concentración de glicol en el agua: 0 %
Potencia del aceite de diámetro a carga
nominal: 4690-450 kW
Potencia eléctrica bruta generada a carga nominal: 1001 kW
Consumo
eléctrico interno del módulo ORC a carga nominal: 51 kW
Potencia eléctrica neta generada a
carga nominal: 950 kW
Potencia térmica generada por el condensador a carga nominal: 4099
kW
Carga mínima posible: 10 %
Radiación térmica emitida por el módulo ORC a carga
nominal: 90 %
Emisión de ruido a 1 m: 90 dBA
Fluido de trabajo en el circuito termodinámico
Turboden Power 1
Fluido de trabajo contenido en el módulo ORC: 1900 kg
Peso total del
módulo ORC: 53 000 kg
Longitud total del módulo ORC: 15,55 m
Ancho total del módulo ORC
6,4 m
Altura total del módulo ORC: 3,3 m
(como nueva
nunca se ha usado)