SIP Impulse 150-6 motor pump
Apeldoorn
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+31 6 205...
Show
+31 6 20537017
+31 55 533...
Show
+31 55 533 0256
+31 6 480...
Show
+31 6 48061001
Netherlands 
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
Netherlands, Apeldoorn
- available with any desired quick coupling.
- Can be used immediately
- Float switch (start/stop system)
- in stock!
- NEW and UNUSED!
- PUMPED UP AND READY TO FLOW!
- Pumping water-thin to highly viscous liquids and/or solid components
- Screw (channel) pump impeller
- Self-priming (dry, vacuum assisted)
- Spare parts available, usually in stock
- Stack frame
- Suitable for pumping bentonite and drilling emulsions
- Suitable for pumping sewage
- Suitable for pumping surface water / construction site water
- SUPER silent housing (SUPER quiet)
- Supported by van vacuum pump
- We provide appropriate documentation for the purpose of Export
= Remarks =
The SIP 150-6 screw impeller pump is designed and built to meet the needs and demands of much of the world without the need for advanced technologies. This mobile pump unit is the simplest and most basic version in our range of 6″ screw impeller pumps.
The Budget configuration is a typical old-fashioned mechanical configuration, has a direct-drive vacuum pump with V-belt without electromagnetic clutch, so the vacuum pump always works even if the screw pump has water.
This configuration has no level control, and the speed must be adjusted manually via the throttle lever on the engine.
This pump is as basic as you could want... Start/Stop with a switch and the RPM has to be adjusted manually. Equipped with float switching though !
However, the pump unit is completely autonomous and equipped with all the elements that Impulse always offers.
It is equipped with its own fuel tank and obviously also designed to perform in the most demanding and harsh conditions in all corners of the world.
The pump set is driven by the robuste aircooled Hatz 2M41 2 cilinder diesel engine with a minimum of electric components. Operating the pump is extremely easy and is managed by the super simple standard controller with all basic engine protection elements only. This control system is stil giving the protection w.r.t. oil presure and temperature safty stops.
Here are some notable facts:
– Running time on a full tank of 200 liters: on average 85 hours
– Solids passage: 100 mm
– Max. capacity / Max. pressure: 385 m3/h / 28 meters
Throughput capacity: 385 m3/h
Max dirt passage: 100 mm
Motor brand: Hatz
Max. head: 28 MWK
Max dirt passag: 1800 rpm
Weight: 1700 kg
= Dealer information =
Interested? We would be happy to make you an excellent offer! Send an email to show contacts or call show contacts.
Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation?
Don't keep worrying about it, just give us a call.
We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer.
Want to visit us? Yes, please!
Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.
= More information =
General information
Year of manufacture: 2024
Field of application: Construction
Applicable material: Water
Functional
Cargo space capacity: 6.470 l
Quick coupler system: Yes
Condition
General condition: very good
Technical condition: very good
Visual appearance: very good
Damages: none
Financial information
Price: On request