Biesse ROVER C9.50 machining center for wood
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Aalen
Germany, Location:frankfurt
Germany, Kaiserslautern
Germany, Kaiserslautern
Slovakia, Kežmarok
Worktable and clamping
8 ATS plate holders (L = 1525 mm) and 24 slide rails
Automatic positioning of plate holders and slide rails (EPS X-Y)
Pneumatic locking system, divided into 2 working areas in X
8 rear reference stops, stroke 115 mm
8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm)
8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm)
4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system
4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system
Sensor for detecting lowered stops
Pneumatic system for lifting bar holders
6 lifting bar holders for easy loading (H = 74 mm modules)
Vacuum
Vacuum system for a 250 m3/h pump
250 m3/h rotary vane vacuum pump for standard vacuum system
Machining units and configuration
Composition C3-A1:Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unitFlange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical)
Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit
Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical)
Composition C3-P2:Additional Z slide for rear work units, controlled by an independent Z axisBH 42 L drilling headChain tool changer with 22 positions (180 mm center distance)Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changerRH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)
Additional Z slide for rear work units, controlled by an independent Z axis
BH 42 L drilling head
Chain tool changer with 22 positions (180 mm center distance)
Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer
RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)
Systems
Automatic lubrication system
Control unit with 5 interpolating axes
Additional equipment
Conveyor belt for removing chips and scrap pieces (chip conveyor)
Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)
Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.
application type: CNC Wood Machining
Location: Germany
machine type: CNC Processing Center
Available from: 01/06/2026
Number of Axes: 5