Pullmax 6000 stamping press for sale by auction
≈ NZ$5,871
Bochnia
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€1,800
≈ $2,108
≈ NZ$3,522
Poland, Gliwice
€3,500
≈ $4,099
≈ NZ$6,849
Poland, Sochaczew
€4,500
≈ $5,270
≈ NZ$8,806
Poland, Sochaczew
€2,000
≈ $2,342
≈ NZ$3,914
Poland, Sochaczew
€8,000
≈ $9,369
≈ NZ$15,660
Poland, Sochaczew
€9,500
≈ $11,130
≈ NZ$18,590
Poland, Sochaczew
the sale does not include a post-processor without which it can only be operated using G-codes
outside the Seller operates using the Jetcam program, but it is not included in the scope of the machine sold
machine dimensions - 5100x5800x2400mm,
control cabinet dimensions - 2650x800x2350mm,
control panel dimesions - 800x750x1850mm"
Table X-Y:
-Move X: 2590mm
-Move Y: 1725mm
-Thickness plate max/min: 6.4/0.7
-Max weight of plate: 220 kg (by maximum speed - 55kg)
with wide range of tools, the sale does not include a post-processor without which it can only be operated using G-codes outside the Seller operates using the Jetcam program, but it is not included in the scope of the machine sold machine dimensions - 5100x5800x2400mm, control cabinet dimensions - 2650x800x2350mm, control panel dimesions - 800x750x1850mm" Table X-Y: Move X: 2590mm -Move Y: 1725mm -Thickness plate max/min: 6.4/0.7 -Max weight of plate: 220 kg (by maximum speed - 55kg)
im Verkauf ist kein Postprozessor enthalten, ohne den er nur über G-Codes betrieben werden kann
außerhalb des Verkäufers mit dem Jetcam-Programm arbeitet, aber es ist nicht im Umfang der verkauften Maschine enthalten
Abmessungen der Maschine - 5100x5800x2400mm,
Abmessungen des Schaltschranks - 2650x800x2350mm,
Abmessungen des Bedienfelds - 800x750x1850mm"
Tabelle X-Y:
-X bewegen: 2590mm
-Bewegung Y: 1725mm
-Dicke Blech max/min: 6,4/0,7
-Maximales Gewicht der Platte: 220 kg (bei maximaler Geschwindigkeit - 55 kg)
la venta no incluye un postprocesador sin el cual solo se puede operar utilizando códigos G
fuera del Vendedor opera utilizando el programa Jetcam, pero no está incluido en el alcance de la máquina vendida
dimensiones de la máquina - 5100x5800x2400mm,
dimensiones del armario de control - 2650x800x2350mm,
Dimensiones del panel de control - 800x750x1850mm"
Tabla X-Y:
-Mover X: 2590mm
-Mover Y: 1725mm
-Espesor de la placa máx. / min: 6.4 / 0.7
-Peso máximo de la placa: 220 kg (por velocidad máxima - 55 kg)
myynti ei sisällä jälkiprosessoria, jota ilman sitä voidaan käyttää vain G-koodeilla
myyjän ulkopuolella toimii Jetcam-ohjelmalla, mutta se ei sisälly myytävän koneen laajuuteen
koneen mitat - 5100x5800x2400mm,
kytkentäkaapin mitat - 2650x800x2350mm,
ohjauspaneelin mitat - 800x750x1850mm"
Taulukko X-Y:
-Move X: 2590mm
-Liike Y: 1725 mm
-Levyn paksuus max/min: 6,4/0,7
-Levyn enimmäispaino: 220 kg (maksiminopeudella - 55 kg)
la vente n’inclut pas de post-processeur sans lequel elle ne peut être utilisée qu’à l’aide de codes G
à l’extérieur du Vendeur utilise le programme Jettam, mais il n’est pas inclus dans le champ d’application de la machine vendue
dimensions de la machine - 5100x5800x2400mm,
dimensions de l’armoire de commande - 2650x800x2350mm,
dimensions du panneau de commande - 800x750x1850mm"
Tableau X-Y :
-Déplacement X : 2590 mm
-Déplacement Y : 1725 mm
-Épaisseur de la plaque max/min : 6,4 / 0,7
-Poids maximum de la plaque : 220 kg (par vitesse maximale - 55kg)
la vendita non include un post-processore senza il quale può essere utilizzato solo utilizzando i codici G
al di fuori del Venditore opera utilizzando il programma Jetcam, ma non è incluso nell'ambito della macchina venduta
dimensioni della macchina - 5100x5800x2400mm,
dimensioni dell'armadio di controllo - 2650x800x2350mm,
Dimensioni pannello di controllo - 800x750x1850mm"
Tavolo X-Y:
-Sposta X: 2590 mm
-Sposta Y: 1725 mm
-Spessore piastra max/min: 6,4/0,7
-Peso massimo della piastra: 220 kg (con velocità massima - 55kg)
de verkoop is exclusief een naverwerker, zonder welke deze alleen met G-codes kan worden bediend
buiten de verkoper werkt met behulp van het Jetcam-programma, maar het is niet inbegrepen in de reikwijdte van de verkochte machine
Afmetingen machine - 5100x5800x2400mm,
Afmetingen schakelkast - 2650x800x2350mm,
Afmetingen bedieningspaneel - 800x750x1850mm"
Tabel X-Y:
-Beweeg X: 2590mm
-Beweging Y: 1725 mm
-Dikte plaat max/min: 6.4/0.7
-Max gewicht van de plaat: 220 kg (bij maximale snelheid - 55 kg)
sprzedaż nie obejmuje postprocesora, bez którego może być obsługiwany tylko za pomocą kodów G
poza Sprzedawcą działa z wykorzystaniem programu Jetcam, ale nie jest on objęty zakresem sprzedawanej maszyny
wymiary maszyny - 5100x5800x2400mm,
wymiary szafy sterowniczej - 2650x800x2350mm,
wymiary panelu sterowania - 800x750x1850mm"
Tabela X-Y:
-Ruch X: 2590 mm
-Ruch Y: 1725 mm
-Grubość płyty max / min: 6,4 / 0,7
-Maksymalna waga talerza: 220 kg (przy maksymalnej prędkości - 55kg)
vânzarea nu include un post-procesor fără de care poate fi operat doar folosind coduri G
în afara Vânzătorului operează folosind programul Jetcam, dar nu este inclus în domeniul de aplicare al aparatului vândut
dimensiunile mașinii - 5100x5800x2400mm,
dimensiuni dulap de distribuție - 2650x800x2350mm,
Dimensiuni ale panoului de control - 800x750x1850mm"
Tabelul X-Y:
-Mutare X: 2590mm
-Mutare Y: 1725mm
-Grosimea plăcii max/min: 6.4/0.7
-Greutatea maximă a plăcii: 220 kg (până la viteza maximă - 55 kg)
försäljningen omfattar inte en efterbehandlare, utan vilken den endast kan användas med G-koder
utanför säljaren arbetar med hjälp av jetcam-programmet, men det ingår inte i omfånget för den sålda maskinen
maskinens mått - 5100x5800x2400mm,
styrskåpets mått - 2650x800x2350mm,
Kontrollpanelens mått - 800x750x1850mm"
Tabell X–Y:
-Flytta X: 2590mm
-Flytta Y: 1725mm
-Tjocklek platta max / min: 6,4 / 0,7
-Max vikt på plattan: 220 kg (vid maximal hastighet - 55 kg)