LOROCH Solution K850 sharpening machine for sale by auction
≈ NZ$34,000
Wuppertal
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€499
≈ $586.60
≈ NZ$969.40
Germany, Velen-Ramsdorf
€19,990
≈ $23,500
≈ NZ$38,830
Germany, Wuppertal
€13,000
≈ $15,280
≈ NZ$25,260
Germany, Geilenkirchen
€950
≈ $1,117
≈ NZ$1,846
Germany, Großenhain
€12,000
≈ $14,110
≈ NZ$23,310
Germany, Bocholt
€9,500
≈ $11,170
≈ NZ$18,460
Germany, Schöffengrund
€2,300
≈ $2,704
≈ NZ$4,468
Germany, Mietingen
€9,500
≈ $11,170
≈ NZ$18,460
Germany, Schöffengrund
€2,300
≈ $2,704
≈ NZ$4,468
Germany, Mietingen
€3,000
≈ $3,527
≈ NZ$5,828
Germany, Velen-Ramsdorf
€10,000
≈ $11,760
≈ NZ$19,430
Germany, Schöffengrund
€20,000
≈ $23,510
≈ NZ$38,850
Germany, Schöffengrund
Grinding Wheel Material: CBN/Diamond
Grinding wheel diameter: 200 mm
Grinding wheel thickness (trunk body): 8 mm
Grinding wheel thickness (lining): 1.3 to 5 mm
Grinding wheel bore: 32 mm
Circumferential speed at idle:
CBN: 60 m/s
Diamond: 40 m/s
Speed grinding spindle:
CBN: ~5700 1/min
Diamond: ~3780 1/min
Circular Saw Blade
Outer diameter: (40) 130 – 850 mm
Thickness: max. 8 mm
Tooth pitch: 1 – 50 mm
Number of teeth: 2 – 998
Feed speed: max. 60 teeth/minute
Chamfering diameter: ≥ 145 mm
More data
Weight: approx. 1600 kg
Coolant tank capacity: approx. 300 litres
Schleifscheibenmaterial: CBN / Diamant
Schleifscheibendurchmesser: 200 mm
Schleifscheibendicke (Stammkörper): 8 mm
Schleifscheibendicke (Belag): 1,3 bis 5 mm
Schleifscheibenbohrung: 32 mm
Umfangsgeschwindigkeit im Leerlauf:
CBN: 60 m/s
Diamant: 40 m/s
Drehzahl Schleifspindel:
CBN: ~5700 1/min
Diamant: ~3780 1/min
Kreissägeblatt
Außendurchmesser: (40) 130 – 850 mm
Dicke: max. 8 mm
Zahnteilung: 1 – 50 mm
Zähnezahl: 2 – 998
Vorschubgeschwindigkeit: max. 60 Zähne/Minute
Anfasdurchmesser: ≥ 145 mm
Weitere Daten
Gewicht: ca. 1600 kg
Kühlschmierstoffbehälter-Inhalt: ca. 300 Liter
Produktspezifische Daten – Schleifscheibe Schleifscheibenmaterial: CBN / Diamant
Schleifscheibendurchmesser: 200 mm
Schleifscheibendicke (Stammkörper): 8 mm
Schleifscheibendicke (Belag): 1,3 bis 5 mm
Schleifscheibenbohrung: 32 mm
Umfangsgeschwindigkeit im Leerlauf: CBN: 60 m/s
Diamant: 40 m/s
Drehzahl Schleifspindel: CBN: ~5700 1/min
Kreissägeblatt Außendurchmesser: (40) 130 – 850 mm
Dicke: max. 8 mm
Zahnteilung: 1 – 50 mm
Zähnezahl: 2 – 998
Vorschubgeschwindigkeit: max. 60 Zähne/Minute
Anfasdurchmesser: ≥ 145 mm
Weitere Daten Gewicht: ca. 1600 kg
Kühlschmierstoffbehälter-Inhalt: ca. 300 Liter
Marke: LOROCH
Länge: 2100
Höhe: 2450
Breite: 1350
Diamant: ~3780 1/min
Material de la muela abrasiva: CBN / Diamante
Diámetro de la muela: 200 mm
Espesor de la muela abrasiva (cuerpo del tronco): 8 mm
Espesor de la muela abrasiva (revestimiento): 1,3 a 5 mm
Diámetro de la muela abrasiva: 32 mm
Velocidad circunferencial al ralentí:
CBN: 60 m/s
Diamante: 40 m/s
Husillo de rectificado de velocidad:
CBN: ~5700 1/min
Diamante: ~3780 1/min
Hoja de sierra circular
Diámetro exterior: (40) 130 – 850 mm
Grosor: máx. 8 mm
Paso de dientes: 1 – 50 mm
Número de dientes: 2 – 998
Velocidad de avance: máx. 60 dientes/minuto
Diámetro de biselado: ≥ 145 mm
Más datos
Peso: aprox. 1600 kg
Capacidad del depósito de refrigerante: aprox. 300 litros
Hiomalaikan materiaali: CBN/timantti
Hiomalaikan halkaisija: 200 mm
Hiomalaikan paksuus (rungon runko): 8 mm
Hiomalaikan paksuus (vuori): 1,3 - 5 mm
Hiomalaikan reikä: 32 mm
Kehänopeus joutokäynnillä:
CBN: 60 m/s
Timantti: 40 m/s
Nopea hiontakara:
CBN: ~5700 1/min
Timantti: ~3780 1/min
Pyörösahanterä
Ulkohalkaisija: (40) 130 – 850 mm
Paksuus: max. 8 mm
Hammasväli: 1 – 50 mm
Hampaiden lukumäärä: 2 – 998
Syöttönopeus: max. 60 hammasta/minuutti
Viiston halkaisija: ≥ 145 mm
Lisää tietoa
Paino: n. 1600 kg
Jäähdytysnestesäiliön
tilavuus: n. 300 litraa
Matériau de la meule : CBN/diamant
Diamètre de la meule : 200 mm
Épaisseur de la meule (corps du tronc) : 8 mm
Épaisseur de la meule (revêtement) : 1,3 à 5 mm
Alésage de la meule : 32 mm
Vitesse circonférentielle au ralenti :
CBN : 60 m/s
Diamant : 40 m/s
Broche de rectification rapide :
CBN : ~5700 1/min
Diamant : ~3780 1/min
Lame de scie circulaire
Diamètre extérieur : (40) 130 – 850 mm
Epaisseur : max. 8 mm
Pas de dent : 1 – 50 mm
Nombre de dents : 2 – 998
Vitesse d’avance : max. 60 dents/minute
Diamètre de chanfreinage : ≥ 145 mm
Plus de données
Poids : env. 1600 kg
Capacité du réservoir de liquide de refroidissement : env. 300 litres
Materiale della mola: CBN/diamante
Diametro mola: 200 mm
Spessore della mola (corpo del tronco): 8 mm
Spessore della mola (rivestimento): da 1,3 a 5 mm
Foro mola: 32 mm
Velocità circonferenziale al minimo:
CBN: 60 m/s
Diamante: 40 m/s
Mandrino di rettifica veloce:
CBN: ~5700 1/min
Diamante: ~3780 1/min
Lama per sega circolare
Diametro esterno: (40) 130 – 850 mm
Spessore: max. 8 mm
Passo dei denti: 1 – 50 mm
Numero di denti: 2 – 998
Velocità di avanzamento: max. 60 denti/minuto
Diametro di smussatura: ≥ 145 mm
Altri dati
Peso: circa 1600 kg
Capacità del serbatoio del liquido di raffreddamento: circa 300 litri
Materiaal slijpschijf: CBN/Diamond
Diameter slijpschijf: 200 mm
Dikte slijpschijf (kofferlichaam): 8 mm
Dikte slijpschijf (voering): 1,3 tot 5 mm
Boring slijpschijf: 32 mm
Omtreksnelheid bij stationair toerental:
CBN: 60 m/s
Diamant: 40 m/s
Snelheid slijpspindel:
CBN: ~5700 1/min
Diamant: ~3780 1/min
Cirkelzaagblad
Buitendiameter: (40) 130 – 850 mm
Dikte: max. 8 mm
Tandafstand: 1 – 50 mm
Aantal tanden: 2 – 998
Aanvoersnelheid: max. 60 tanden/minuut
Diameter afschuining: ≥ 145 mm
Meer gegevens
Gewicht: ca. 1600 kg
Inhoud koelvloeistoftank: ca. 300 liter
Materiał ściernicy: CBN / diament
Średnica tarczy szlifierskiej: 200 mm
Grubość ściernicy (korpus tułowia): 8 mm
Grubość ściernicy (okładziny): 1,3 do 5 mm
Otwór ściernicy: 32 mm
Prędkość obwodowa na biegu jałowym:
CBN: 60 m/s
Diament: 40 m/s
Wrzeciono szlifierskie prędkości:
CBN: ~5700 1/min
Diament: ~3780 1/min
Brzeszczot do piły tarczowej
Średnica zewnętrzna: (40) 130 – 850 mm
Grubość: max 8 mm
Podziałka uzębienia: 1 – 50 mm
Ilość zębów: 2 – 998
Prędkość posuwu: max 60 zębów/minutę
Średnica fazowania: ≥ 145 mm
Więcej danych
Waga: ok. 1600 kg
Pojemność zbiornika płynu chłodzącego: ok. 300 litrów
Material roată șlefuită: CBN / Diamond
Diametrul discului abraziv: 200 mm
Grosimea discului abraziv (corpul portbagajului): 8 mm
Grosimea discului abraziv (căptușeală): 1,3 până la 5 mm
Alezaj disc abraziv: 32 mm
Viteza circumferențială la ralanti:
CBN: 60 m/s
Diamant: 40 m/s
Ax de șlefuire rapid:
CBN: ~5700 1/min
Diamant: ~3780 1/min
Pânză de ferăstrău circular
Diametru exterior: (40) 130 – 850 mm
Grosime: max. 8 mm
Pasul dinților: 1 – 50 mm
Număr de dinți: 2 – 998
Viteza de alimentare: max. 60 dinți/minut
Diametru teșire: ≥ 145 mm
Mai multe date
Greutate: aprox. 1600 kg
Capacitatea rezervorului de lichid de răcire: aproximativ 300 litri
Material slipskiva: CBN/Diamant
Slipskivans diameter: 200 mm
Slipskivans tjocklek (stammens kropp): 8 mm
Slipskivans tjocklek (foder): 1,3 till 5 mm
Slipskivans hål: 32 mm
Varvtal runt omkrets på tomgång:
CBN: 60 m/s
Diamant: 40 m/s
Hastighet slipning spindel:
CBN: ~5700 1/min
Diamant: ~3780 1/min
Cirkelsågblad
Ytterdiameter: (40) 130 – 850 mm
Tjocklek: max 8 mm
Tanddelning: 1–50 mm
Antal tänder: 2 – 998
Matningshastighet: max 60 tänder/minut
Diameter fasning: ≥ 145 mm
Mer data
Vikt: ca 1600 kg
Kylvätsketankens kapacitet: ca 300 liter