VOEST ALPINE DA 1 metal lathe for sale by auction
≈ NZ$3,977
Velen-Ramsdorf
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€1,890
≈ $2,200
≈ NZ$3,777
Germany, Velen-Ramsdorf
€2,000
≈ $2,328
≈ NZ$3,997
Germany, Velen-Ramsdorf
€1,900
≈ $2,211
≈ NZ$3,797
Germany, Velen-Ramsdorf
€1,700
≈ $1,979
≈ NZ$3,398
Germany, Velen-Ramsdorf
€1,800
≈ $2,095
≈ NZ$3,597
Germany, Velen-Ramsdorf
€1,700
≈ $1,979
≈ NZ$3,398
Germany, Velen-Ramsdorf
€2,600
≈ $3,026
≈ NZ$5,196
Germany, Velen-Ramsdorf
€1,800
≈ $2,095
≈ NZ$3,597
Germany, Windhagen
€1,500
≈ $1,746
≈ NZ$2,998
Germany, Schöneck
€900
≈ $1,048
≈ NZ$1,799
Germany, Velen-Ramsdorf
€1,500
≈ $1,746
≈ NZ$2,998
Germany, Weilheim Teck
€3,600
≈ $4,190
≈ NZ$7,195
Germany, Velen-Ramsdorf
€5,100
≈ $5,936
≈ NZ$10,190
Germany, Velen-Ramsdorf
€1,200
≈ $1,397
≈ NZ$2,398
Germany, Velen-Ramsdorf
€1,500
≈ $1,746
≈ NZ$2,998
Germany, Hösbach-Rottenberg
€2,500
≈ $2,910
≈ NZ$4,997
Germany, Rüsselsheim
€650
≈ $756.50
≈ NZ$1,299
Germany, Villingen-Schwenningen
€550
≈ $640.10
≈ NZ$1,099
Germany, Schöneck
€750
≈ $872.90
≈ NZ$1,499
Germany, Schöneck
€950
≈ $1,106
≈ NZ$1,899
Germany, Schöneck
- 4-jaw chuck 250mm
- Multifix quick-change steel holder
- Second steel holder on support
-Lunette
- Chip tray
- Machine light
-Documentation
Turning diameter over bed 500 mm
Turning diameter over support 340 mm
Turning length 1000 mm
Turning diameter in the offset 650 mm
Speed 21 - 1500 rpm
Center height 250 mm
Spindle bore 46 mm
Total power requirement 5.5 KW
Machine weight approx. 1.45 t
Dimensions approx. 2.3 x 1.1 x 1.7 m
- 4-Backenfutter 250mm
- Multifix Schnellwechsel-Stahlhalter
- zweiter Stahlhalter auf Support
- Lünette
- Spänewanne
- Maschinenleuchte
- Dokumentation
Drehdurchmesser über Bett 500 mm
Drehdurchmesser über Support 340 mm
Drehlänge 1000 mm
Drehdurchmesser in der Kröpfung 650 mm
Drehzahl 21 - 1500 U/min
Spitzenhöhe 250 mm
Spindelbohrung 46 mm
Gesamtleistungsbedarf 5,5 KW
Maschinengewicht ca. 1,45 t
Raumbedarf ca. 2,3 x 1,1 x 1,7 m
Marke: VOEST ALPINE
Länge: 2300
Höhe: 1700
Breite: 1100
Leit- und Zugspindeldrehmaschine
4-Backenfutter 250mm
Multifix Schnellwechsel-Stahlhalter
zweiter Stahlhalter auf Support
Lünette
Spänewanne
Maschinenleuchte
Dokumentation
Drehdurchmesser über Bett 500 mm
Drehdurchmesser über Support 340 mm
Drehlänge 1000 mm
Drehdurchmesser in der Kröpfung 650 mm
Drehzahl 21 - 1500 U/min
Spitzenhöhe 250 mm
Spindelbohrung 46 mm
Gesamtleistungsbedarf 5,5 KW
Maschinengewicht ca. 1,45 t
Raumbedarf ca. 2,3 x 1,1 x 1,7 m
- Mandrin à 4 mors 250mm
- Support en acier à changement rapide Multifix
- Deuxième support en acier sur support
-Lunette
- Plateau à copeaux
- Éclairage de la machine
-Documentation
Diamètre de retournement au-dessus du lit 500 mm
Diamètre de retournement sur support 340 mm
Longueur de tournage 1000 mm
Diamètre de tournage déporté 650 mm
Vitesse 21 - 1500 tr/min
Hauteur centrale 250 mm
Alésage de la broche 46 mm
Puissance totale requise 5,5 KW
Poids de la machine env. 1,45 t
Dimensions env. 2,3 x 1,1 x 1,7 m
- Mandrino a 4 griffe 250 mm
- Supporto in acciaio a cambio rapido Multifix
- Secondo supporto in acciaio su supporto
-Lunetta
- Vassoio per trucioli
- Luce della macchina
-Documentazione
Diametro di tornitura sul letto 500 mm
Diametro di tornitura sul supporto 340 mm
Lunghezza di tornitura 1000 mm
Diametro di tornitura in offset 650 mm
Velocità 21 - 1500 giri/min
Altezza punte 250 mm
Foro mandrino 46 mm
Potenza totale richiesta 5,5 KW
Peso della macchina circa 1,45 t
Dimensioni: circa 2,3 x 1,1 x 1,7 m
- 4-klauwplaat 250mm
- Multifix snelwissel stalen houder
- Tweede stalen houder op steun
-Lunette
- Chip lade
- Machine licht
-Documentatie
Draaidiameter over bed 500 mm
Draaidiameter over steun 340 mm
Draailengte 1000 mm
Draaidiameter in de offset 650 mm
Toerental 21 - 1500 tpm
Harthoogte 250 mm
Spindel boring 46 mm
Totaal benodigd vermogen 5,5 KW
Gewicht van de machine ca. 1,45 t
Afmetingen: ca. 2,3 x 1,1 x 1,7 m