Verified seller 
Seiger SLZ 1200 x 3000 metal lathe for sale by auction
≈ US$5,824
Mittweide
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€800
≈ $1,589
≈ US$931.80
Germany, Bad Wimpfen
€1,000
≈ $1,986
≈ US$1,165
Germany, Velen-Ramsdorf
€1,000
≈ $1,986
≈ US$1,165
Germany, Velen-Ramsdorf
€500
≈ $992.90
≈ US$582.40
Germany, Velen-Ramsdorf
€500
≈ $992.90
≈ US$582.40
Germany, Velen-Ramsdorf
€500
≈ $992.90
≈ US$582.40
Germany, Velen-Ramsdorf
€500
≈ $992.90
≈ US$582.40
Germany, Velen-Ramsdorf
€250
≈ $496.50
≈ US$291.20
Germany, Velen-Ramsdorf
€500
≈ $992.90
≈ US$582.40
Germany, Velen-Ramsdorf
€500
≈ $992.90
≈ US$582.40
Germany, Velen-Ramsdorf
€500
≈ $992.90
≈ US$582.40
Germany, Velen-Ramsdorf
€1,500
≈ $2,979
≈ US$1,747
Germany, Mittweide
€2,500
≈ $4,965
≈ US$2,912
Germany, Mittweide
€250
≈ $496.50
≈ US$291.20
Germany, Velen-Ramsdorf
€1,700
≈ $3,376
≈ US$1,980
Germany, Bad Wimpfen
€1,500
≈ $2,979
≈ US$1,747
Germany, Mittweide
€500
≈ $992.90
≈ US$582.40
Germany, Velen-Ramsdorf
€2,500
≈ $4,965
≈ US$2,912
Germany, Velen-Ramsdorf
€500
≈ $992.90
≈ US$582.40
Germany, Velen-Ramsdorf
€10,000
≈ $19,860
≈ US$11,650
Germany, Pforzheim
Seiger, type SLZ 1200 x 3000.The
machine is equipped with a Siemens Sinumerik cycle control (teach-in).
Version with AC main drive, face plate, 2x chip conveyor, hydraulic power unit and separate control cabinet.
Documentation and tool holders available.
Machine without tailstock.
Viewing and test run under voltage possible by appointment.
Working range
Center width: 3000 mm
Circulation diameter over bed: 1200 mm
Rotation diameter over face slide: 850 mm
Travel distance face slide: 620 mm
Bed width: 750 mm
Spindle
head: DIN 55027 Size 11
Spindle diameter front bearing: 190 mm
Spindle bore: 104 mm
Speed range: 5 – 900 min⁻¹
Max. torque: 6000 Nm
Main drive
Drive power: 37 / 52 kW (100 % / 60 % ED)
Feed
X-feed force: 24,000 N
Z-feed force: 16,000 N
Rapid traverse X: 7 m/min
Rapid traverse Z: 4 m/min
Tool holder
Turning bit cross-section: 40 × 40 mm
Electrical data
Mains voltage: 400 V
Frequency: 50 Hz
Max. current consumption: 200 A
Workpiece weights
between tips without steady rest: 5,000 kg
between tips with 1 steady rest: 6,000 kg
between tips with 2 steady rests: 7,000 kg
flying in faceplate: 1,800 kg
Dimensions / Weight
Machine: approx. 6400 × 2200 × 2300 mm
Stud Movement: approx. 7700 × 1300 × 2500 mm
Additional Hydraulics: approx. 800 × 500 × 900 mm
Machine Weight: approx. 14,000 kg
Stud Movement: approx. 3,500 kg
Electrical Control Cabinet: approx. 1,000 kg