KZTS Krasnodarskiy stankostroitelnyy zavod imeni Sedina 1541 Carouse metal lathe for sale by auction
≈ NZ$22,320
Sochaczew
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€1,750
≈ $2,059
≈ NZ$3,397
Poland, Sochaczew
€45,000
≈ $52,950
≈ NZ$87,360
Poland, Sochaczew
€15,000
≈ $17,650
≈ NZ$29,120
Poland, Złotów
€7,000
≈ $8,237
≈ NZ$13,590
Poland, Sochaczew
€3,000
≈ $3,530
≈ NZ$5,824
Poland, Sochaczew
€6,000
≈ $7,060
≈ NZ$11,650
50 Hz
Poland, Sochaczew
€4,500
≈ $5,295
≈ NZ$8,736
Poland, Sochaczew
€22,500
≈ $26,480
≈ NZ$43,680
Poland, Sochaczew
€7,500
≈ $8,825
≈ NZ$14,560
Poland, Sochaczew
€20,000
≈ $23,530
≈ NZ$38,830
Poland, Sochaczew
€32,000
≈ $37,650
≈ NZ$62,120
Poland, Sochaczew
€1,500
≈ $1,765
≈ NZ$2,912
Poland, Sochaczew
€2,000
≈ $2,353
≈ NZ$3,883
Poland, Sochaczew
€500
≈ $588.40
≈ NZ$970.60
Poland, Sochaczew
€3,500
≈ $4,118
≈ NZ$6,795
Poland, Sochaczew
turning diameter: 1700 mm,
turning height: 1000 mm,
spindle speed: 4 - 200 rpm,
feed range: 0.4 - 16 mm/min,
total power requirement: approx. 30 kW,
Lathe in disassembled condition.
table diameter: 1400 mm, turning diameter: 1700 mm, turning height: 1000 mm, spindle speed: 4 - 200 rpm, feed range: 0.4 - 16 mm/min, total power requirement: approx. 30 kW, Lathe in disassembled condition
length: 13000
height: 2700
width: 2400
Drehdurchmesser: 1700 mm,
Drehhöhe: 1000 mm,
Spindeldrehzahl: 4 - 200 U/min,
Vorschubbereich: 0,4 - 16 mm/min,
Gesamtleistungsbedarf: ca. 30 kW,
Drehmaschine in zerlegtem Zustand.
diámetro de giro: 1700 mm,
altura de giro: 1000 mm,
velocidad del husillo: 4 - 200 rpm,
Rango de alimentación: 0,4 - 16 mm/min,
potencia total requerida: aprox. 30 kW,
Torno en estado desmontado.
sorvaushalkaisija: 1700 mm,
kääntökorkeus: 1000 mm,
karan nopeus: 4 - 200 rpm,
syöttöalue: 0,4 - 16 mm/min,
kokonaistehontarve: n. 30 kW,
Sorvi purettuna.
Diamètre de tournage : 1700 mm,
Hauteur de tournage : 1000 mm,
vitesse de la broche : 4 - 200 tr/min,
plage d’alimentation : 0,4 - 16 mm/min,
puissance totale requise : env. 30 kW,
Tour à l’état démonté.
diametro di tornitura: 1700 mm,
altezza di tornitura: 1000 mm,
velocità del mandrino: 4 - 200 giri/min,
campo di avanzamento: 0,4 - 16 mm/min,
potenza totale richiesta: circa 30 kW,
Tornio in condizioni smontate.
draaidiameter: 1700 mm,
draaihoogte: 1000 mm,
spilsnelheid: 4 - 200 tpm,
voedingsbereik: 0,4 - 16 mm/min,
totaal benodigd vermogen: ca. 30 kW,
Draaibank in gedemonteerde toestand.
średnica toczenia: 1700 mm,
wysokość toczenia: 1000 mm,
prędkość obrotowa wrzeciona: 4 - 200 obr/min,
zakres posuwu: 0,4 - 16 mm/min,
całkowite zapotrzebowanie mocy: ok. 30 kW,
Tokarka w stanie zdemontowanym.
diametru de strunjire: 1700 mm,
înălțime de rojire: 1000 mm,
viteza arborelui principal: 4 - 200 rpm,
interval de alimentare: 0,4 - 16 mm/min,
putere totală necesară: aproximativ 30 kW,
Strung în stare dezasamblată.
svarvdiameter: 1700 mm,
vändhöjd: 1000 mm,
Spindelvarvtal: 4 - 200 varv/min,
matningsområde: 0,4 - 16 mm/min,
totalt effektbehov: ca 30 kW,
Svarv i demonterat skick.