Häner HMS12.18 hydraulic shears for sale by auction
≈ NZ$9,368
Olpe
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€2,100
≈ $2,386
≈ NZ$4,015
Germany, Olpe
€3,000
≈ $3,408
≈ NZ$5,735
Germany, Olpe
€600
≈ $681.60
≈ NZ$1,147
Germany, Olpe
€475
≈ $539.60
≈ NZ$908.10
Germany, Olpe
€291
≈ $330.60
≈ NZ$556.30
Germany, Olpe
€360
≈ $409
≈ NZ$688.20
Germany, Olpe
€150
≈ $170.40
≈ NZ$286.80
Germany, Olpe
€360
≈ $409
≈ NZ$688.20
Germany, Olpe
€750
≈ $852
≈ NZ$1,434
Germany, Olpe
€2,130
≈ $2,420
≈ NZ$4,072
Germany, Olpe
€600
≈ $681.60
≈ NZ$1,147
Germany, Olpe
€285
≈ $323.80
≈ NZ$544.90
Germany, Olpe
€450
≈ $511.20
≈ NZ$860.30
Germany, Olpe
Excavator weight: 12 - 18 t
Operating weight: 1,450 kg
Dimension A: 2,280 mm
Dimension B: 820 mm
Dimension C: 360 mm
Dimension D: 560 mm
Rotation: 360°
Front cutting force: 140 t
Rear cutting force: 100 t
Interchangeable blades: yes
Hydraulic Hoses Turn: 1/2 inch
Hydraulic hoses open/close: 3/4 inch
Oil flow rate rotation: 30 - 40 l/min
Operating pressure on/off: 250 -300 bar
Oil flow rate on/off: 90 - 110 l/min
Cutting performance:
Steel plates: 28 mm
U-beam: 300 x 100 x 15 mm
H-beam: 300 x 100 x 15 mm
T-beam: 300 x 15 mm
Angle iron: 200 x 200 x 15 mm
Round steel: Ø 60 mm
Steel tube: Ø 245 x 10 mm
Cycle time: 8 - 12 s
Baggergewicht: 12 - 18 t
Betriebsgewicht: 1.450 kg
Maß A: 2.280 mm
Maß B: 820 mm
Maß C: 360 mm
Maß D: 560 mm
Rotation: 360°
Schneidkraft vorne: 140 t
Schneidkraft hinten: 100 t
Auswechselbare Messer: ja
Hydraulikschläuche drehen: 1/2 Zoll
Hydraulikschläuche auf/zu: 3/4 Zoll
Öldurchflussmenge Rotation: 30 - 40 l/min
Betriebsdruck auf/zu: 250 -300 bar
Öldurchflussmenge auf/zu: 90 - 110 l/min
Schnittleistung:
Stahlplatten: 28 mm
U-Träger: 300 x 100 x 15 mm
H-Träger: 300 x 100 x 15 mm
T-Träger: 300 x 15 mm
Winkeleisen: 200 x 200 x 15 mm
Rundstahl: Ø 60 mm
Stahlrohr: Ø 245 x 10 mm
Zykluszeit: 8 - 12 s
Baggergewicht: 12 - 18 t
Betriebsgewicht: 1.450 kg
Maß A: 2.280 mm
Maß B: 820 mm
Maß C: 360 mm
Maß D: 560 mm
Rotation: 360°
Schneidkraft vorne: 140 t
Schneidkraft hinten: 100 t
Auswechselbare Messer: ja
Hydraulikschläuche drehen: 1/2 Zoll
Hydraulikschläuche auf/zu: 3/4 Zoll
Öldurchflussmenge Rotation: 30 - 40 l/min
Betriebsdruck auf/zu: 250 -300 bar
Öldurchflussmenge auf/zu: 90 - 110 l/min
Stahlplatten: 28 mm
U-Träger: 300 x 100 x 15 mm
H-Träger: 300 x 100 x 15 mm
T-Träger: 300 x 15 mm
Winkeleisen: 200 x 200 x 15 mm
Rundstahl: Ø 60 mm
Stahlrohr: Ø 245 x 10 mm
Zykluszeit: 8 - 12 s
Häner Metallschere HMS12.18
Schnittleistung
Peso de la excavadora: 12 - 18 t
Peso en orden de marcha: 1.450 kg
Dimensión A: 2.280 mm
Dimensión B: 820 mm
Dimensión C: 360 mm
Dimensión D: 560 mm
Rotación: 360°
Fuerza de corte frontal: 140 t
Fuerza de corte trasera: 100 t
Cuchillas intercambiables: sí
Giro de las mangueras hidráulicas: 1/2 pulgada
Mangueras hidráulicas de apertura/cierre: 3/4 de pulgada
Rotación del caudal de aceite: 30 - 40 l/min
Presión de encendido/apagado de servicio: 250 -300 bar
Caudal de aceite encendido/apagado: 90 - 110 l/min
Rendimiento de corte:
Placas de acero: 28 mm
Viga en U: 300 x 100 x 15 mm
Viga en H: 300 x 100 x 15 mm
Viga en T: 300 x 15 mm
Ángulo de hierro: 200 x 200 x 15 mm
Acero redondo: Ø 60 mm
Tubo de acero: Ø 245 x 10 mm
Tiempo de ciclo: 8 - 12 s
Kaivinkoneen paino: 12 - 18 t
Käyttöpaino: 1 450 kg
Mitta A: 2 280 mm
Mitta B: 820 mm
Mitta C: 360 mm
Mitat D: 560 mm
Kierto: 360°
Etuosan lastuamisvoima: 140 t
Takaleikkuuvoima: 100 t
Vaihdettavat terät: kyllä
Hydrauliletkujen kääntö: 1/2 tuumaa
Hydrauliletkut auki/kiinni: 3/4 tuumaa
Öljyn virtausnopeuden kiertonopeus: 30 - 40 l/min
Käyttöpaine päälle/pois: 250-300 bar
Öljyn virtausnopeus päälle/pois: 90 - 110 l/min
Leikkausteho:
Teräslevyt: 28 mm
U-palkki: 300 x 100 x 15 mm
H-palkki: 300 x 100 x 15 mm
T-palkki: 300 x 15 mm
Kulmarauta: 200 x 200 x 15 mm
Pyöreä teräs: Ø 60 mm
Teräsputki: Ø 245 x 10 mm
Jakson aika: 8 - 12 s
Poids de la pelle : 12 - 18 t
Poids en ordre de marche : 1 450 kg
Dimension A : 2 280 mm
Dimension B : 820 mm
Dimension C : 360 mm
Dimension D : 560 mm
Rotation : 360°
Force de coupe avant : 140 t
Force de coupe arrière : 100 t
Lames interchangeables : oui
Rotation des tuyaux hydrauliques : 1/2 pouce
Tuyaux hydrauliques ouverts/fermés : 3/4 pouce
Débit d’huile rotation : 30 - 40 l/min
Pression de service marche/arrêt : 250 -300 bar
Débit d’huile on/off : 90 - 110 l/min
Performances de coupe :
Plaques d’acier : 28 mm
Poutre en U : 300 x 100 x 15 mm
Poutre en H : 300 x 100 x 15 mm
Poutre en T : 300 x 15 mm
Cornière : 200 x 200 x 15 mm
Acier rond : Ø 60 mm
Tube en acier : Ø 245 x 10 mm
Temps de cycle : 8 - 12 s
Peso dell'escavatore: 12 - 18 t
Peso durante il funzionamento: 1.450 kg
Dimensione A: 2.280 mm
Dimensione B: 820 mm
Dimensione C: 360 mm
Dimensione D: 560 mm
Rotazione: 360°
Forza di taglio anteriore: 140 t
Forza di taglio posteriore: 100 t
Lame intercambiabili: sì
Giro dei tubi idraulici: 1/2 pollice
Tubi idraulici aperti/chiusi: 3/4 di pollice
Rotazione della portata dell'olio: 30 - 40 l/min
Pressione di esercizio on/off: 250 -300 bar
Portata olio on/off: 90 - 110 l/min
Prestazioni di taglio:
Piastre in acciaio: 28 mm
Trave a U: 300 x 100 x 15 mm
Trave ad H: 300 x 100 x 15 mm
Trave a T: 300 x 15 mm
Angolo di ferro: 200 x 200 x 15 mm
Acciaio tondo: Ø 60 mm
Tubo in acciaio: Ø 245 x 10 mm
Tempo di ciclo: 8 - 12 s
Gewicht graafmachine: 12 - 18 t
Bedrijfsgewicht: 1.450 kg
Afmeting A: 2.280 mm
Afmeting B: 820 mm
Afmeting C: 360 mm
Afmeting D: 560 mm
Rotatie: 360°
Snijkracht voorzijde: 140 t
Snijkracht achter: 100 t
Verwisselbare messen: ja
Hydraulische slangen draaien: 1/2 inch
Hydraulische slangen openen/sluiten: 3/4 inch
Rotatie oliedebiet: 30 - 40 l/min
Werkdruk aan/uit: 250 -300 bar
Oliedebiet aan/uit: 90 - 110 l/min
Snijprestaties:
Stalen platen: 28 mm
U-balk: 300 x 100 x 15 mm
H-balk: 300 x 100 x 15 mm
T-balk: 300 x 15 mm
Hoekijzer : 200 x 200 x 15 mm
Rond staal: Ø 60 mm
Stalen buis: Ø 245 x 10 mm
Cyclustijd: 8 - 12 s
Masa koparki: 12 - 18 t
Masa eksploatacyjna: 1 450 kg
Wymiar A: 2 280 mm
Wymiar B: 820 mm
Wymiar C: 360 mm
Wymiar D: 560 mm
Obrót: 360°
Przednia siła cięcia: 140 t
Tylna siła cięcia: 100 t
Wymienne ostrza: tak
Skręt węży hydraulicznych: 1/2 cala
Węże hydrauliczne otwierają/zamykają: 3/4 cala
Prędkość obrotowa oleju: 30 - 40 l/min
Ciśnienie robocze wł./wył.: 250 -300 bar
Przepływ oleju wł./wył.: 90 - 110 l/min
Wydajność cięcia:
Blachy stalowe: 28 mm
Belka w kształcie litery U: 300 x 100 x 15 mm
Belka dwuteowa: 300 x 100 x 15 mm
Belka teowa: 300 x 15 mm
Kątownik: 200 x 200 x 15 mm
Stal okrągła: Ø 60 mm
Rura stalowa: Ø 245 x 10 mm
Czas cyklu: 8 - 12 s
Greutatea excavatorului: 12 - 18 t
Greutate operațională: 1.450 kg
Dimensiunea A: 2.280 mm
Dimensiune B: 820 mm
Dimensiune C: 360 mm
Dimensiune D: 560 mm
Rotire: 360°
Forța de tăiere față: 140 t
Forța de tăiere spate: 100 t
Lame interschimbabile: da
Furtunuri hidraulice de rotație: 1/2 inch
Furtunuri hidraulice deschise/închise: 3/4 inch
Debit de rotație ulei: 30 - 40 l/min
Presiune de funcționare pornit/oprit: 250 -300 bar
Debit ulei pornit/oprit: 90 - 110 l/min
Performanță de tăiere:
Plăci de oțel: 28 mm
Grindă U: 300 x 100 x 15 mm
Fascicul H: 300 x 100 x 15 mm
Grindă T: 300 x 15 mm
Fier de călcat unghiular: 200 x 200 x 15 mm
Oțel rotund: Ø 60 mm
Tub de oțel: Ø 245 x 10 mm
Timp de ciclu: 8 - 12 s
Grävmaskinens vikt: 12 - 18 t
Tjänstevikt: 1 450 kg
Mått A: 2 280 mm
Mått B: 820 mm
Mått C: 360 mm
Mått D: 560 mm
Rotation: 360°
Skärkraft fram: 140 t
Bakre skärkraft: 100 t
Utbytbara blad: ja
Hydraulslangar sväng: 1/2 tum
Hydraulslangar öppna/stängs: 3/4 inch
Rotationshastighet oljeflöde: 30 - 40 l/min
Drifttryck på/av: 250 -300 bar
Oljeflöde på/av: 90 - 110 l/min
Skärande prestanda:
Stålplåtar: 28 mm
U-balk: 300 x 100 x 15 mm
H-balk: 300 x 100 x 15 mm
T-balk: 300 x 15 mm
Vinkeljärn: 200 x 200 x 15 mm
Rundstål: Ø 60 mm
Stålrör: Ø 245 x 10 mm
Cykeltid: 8 - 12 s